PRS McCarty SC56 GB 10
The PRS McCarty SC56 GB 10 pairs a weight-reduced mahogany body and maple top with two McCarty III humbuckers. Its premium price and fixed bridge make it a focused choice for players seeking a USA-made single-cut guitar.
★★★★★ 4.5/5 · 2 buyer reviews · 5 min read · updated 2026-10-07 · Tested by Cal Whitaker
PRS McCarty SC56 GB 10 review
The PRS McCarty SC56 GB 10 is a U.S.-made, single-cut electric guitar listed at 4,222. It has a mahogany body with weight relief, a maple top, and a set-in mahogany neck. The listing identifies it as model SC594, while the product name uses SC56. That naming difference is worth noting when checking a retailer's listing or confirming the instrument's identity.
This is a limited edition in Gray Black, with a 10 Top designation. The finish and top designation are part of the supplied product details, but the listing does not describe the individual top's grain or provide photographs of a specific instrument. Buyers should inspect the actual guitar if the appearance of its maple top is a deciding factor.
Body, neck, and fingerboard
The body combines mahogany and maple, while the neck is mahogany and joins the body with a set-in construction. Weight relief is specified, but no instrument weight or description of the relief method is provided. As a result, the feature can be confirmed from the listing, but its effect on the weight or balance of an individual guitar cannot be assessed from these details alone.
The rosewood fingerboard has 22 frets, Old School Birds inlays, and a 254 mm (10-inch) radius. PRS gives the Pattern Vintage neck profile as 22 mm thick at the first fret and 25 mm at the 12th. Those measurements describe a neck that increases in thickness along its length. They offer more concrete information than the profile name alone, though they do not establish how the neck will feel to a particular player.
Binding is listed on both the neck and the body's top. The nut is made from bone and measures 42.9 mm (1.69 inches) wide. The 625 mm (24.6-inch) scale is shorter than a 25.5-inch scale, a useful specification to consider when comparing this guitar with instruments of different scale lengths. The available information does not give string gauge, factory setup, or action measurements.
Pickups, controls, and bridge
The pickup configuration is HH, with one PRS McCarty III Treble humbucker in the bridge position and one PRS McCarty III Bass humbucker in the neck position. The guitar has two volume controls, two tone controls, and a three-way toggle switch. This layout provides separate volume and tone adjustment for each pickup, with the toggle selecting between the two pickups and their combined position. The listing does not specify potentiometer values, capacitor values, or coil-splitting options, so those should not be assumed.
A PRS two-piece bridge is fitted, and the instrument has no tremolo. That makes the bridge specification straightforward for players looking for a fixed-bridge design. The supplied details do not identify the bridge's adjustment range or provide setup measurements. Nickel hardware and PRS Phase III non-locking tuning machines complete the listed hardware. Because the tuners are described as non-locking, this model should not be mistaken for a version with locking machines.
Included items and buying details
The package includes a case and a certificate. A gig bag is not included. The sales unit is one guitar, and the item number is 632810. The product is listed as available since December 2025. These details help distinguish the special Gray Black edition and identify the specific listing when contacting a dealer.
No customer reviews are available for this product. This assessment therefore relies only on the supplied specifications, rather than reported ownership experiences or hands-on testing. In particular, the listing provides no measured weight, setup information, tonal demonstrations, or individual feedback on the neck and pickups.
Technical assessment
The documented specification describes a fixed-bridge, single-cut guitar with a mahogany body, maple top, set-in mahogany neck, rosewood fingerboard, and two humbuckers. Its 24.6-inch scale, 10-inch fingerboard radius, and measured Pattern Vintage neck profile give prospective buyers practical comparison points. The two volume and two tone controls offer independent adjustment for each pickup, while the three-way switch keeps pickup selection conventional.
Before purchasing, confirm the exact model designation with the seller, since the product name and listed model do not match. It is also sensible to verify the instrument's weight, inspect the specific top, and ask about its setup. Those details are not supplied here. The listed features establish what the PRS McCarty SC56 GB 10 includes, but individual comfort, sound, and value depend on the player and the specific instrument.
Shipping and duties
The retailer ships from its warehouse in Germany. Prices are shown in US dollars and do not include import duties. Orders under roughly $800 usually clear US customs without duty; above that, a duty of a few percent may be collected on delivery. 30-day money-back and a 3-year warranty apply.
Scores by area
Where it shines, where it stumbles
What convinced me
- Mahogany body with a maple top, set-in mahogany neck, and rosewood fingerboard.
- Includes a PRS McCarty III humbucker at the bridge and another at the neck, with separate volume and tone controls.
- Made in the USA and supplied with a case and certificate.
What bugged me
- The listed price places it in the premium range.
- No tremolo system is included, and no gig bag is supplied.
Is it the right one for you?
Good pick if
A strong fit for players seeking a USA-made single-cut guitar with two humbuckers and a fixed bridge. Also suited to buyers who value a weight-reduced body, vintage-style neck profile, and included case.Look elsewhere if
Less suitable for players who require a tremolo system or a gig bag in the package. Buyers on a tight budget may find the listed price difficult to justify.Suggested level: Intermediate
Specifications
- Color
- Gray Black
- Body
- Mahogany
- Top
- Maple
- Neck
- Mahogany
- Fretboard
- Rosewood
- Frets
- 22
- Scale
- 625 mm
- Pickups
- HH
- Tremolo
- None
- Including case
- Yes
- Incl. gigbag
- No
- Model
- SC594
- Shape
- Single Cut
- Pickup system
- HH
Up close
Watch and listen
Before you decide
Questions players ask
Does the guitar include a case?
Yes. A case and certificate are included; a gig bag is not.
What pickups are fitted?
It has a PRS McCarty III Treble humbucker at the bridge and a PRS McCarty III Bass humbucker at the neck.
Does it have a tremolo?
No. It uses a PRS two-piece bridge.
What are the scale length and neck profile?
The scale length is 24.6 inches, and the neck profile is Pattern Vintage.
Is there customer feedback available?
No customer reviews were supplied for this product, so there is no review-based assessment.
The last word from the bench
This limited-edition model combines a mahogany body, maple top, set-in neck, and rosewood fingerboard with a pair of PRS McCarty III humbuckers. Its 24.6-inch scale, vintage-style neck profile, and two-piece bridge define a traditional single-cut setup. The weight-reduced body and included case add practical appeal, while the high price calls for careful comparison. No customer reviews were provided, so this assessment is based on the listed specifications only.
Hanging next to it
PRS McCarty SC56 GB 10
Today's price and delivery time are shown at the retailer.






