Heritage Guitar Ascent H-150 Copper

Heritage Guitar Ascent H-150 Copper review

The Heritage Guitar Ascent H-150 Copper is a double-cutaway electric guitar with a maple bolt-on neck, two humbucking pickups, and a Tune-O-Matic bridge. Its copper finish is the feature that first caught one owner's attention. They bought it as a backup for a Les Paul and reported being pleased with the instrument's appearance and feel after it arrived.

The listed price is 332, with availability beginning in July 2026. The body is made from okoume, and the top is listed as basswood. The neck is maple, while the fingerboard is laurel with dot inlays. The specification sheet gives a scale length of 629 mm, or 24.75 inches, a 305 mm (12-inch) fingerboard radius, and 22 super jumbo frets. The neck has a C profile and is attached with bolts.

Build quality and first setup

The owner reported that the guitar arrived promptly and without shipping damage. Their example had no visible finish flaws or other cosmetic marks, and its hardware was mounted straight. The fretwork was also described as well dressed. Those observations apply to the reviewed example, rather than guaranteeing that every guitar will arrive in exactly the same condition.

Out of the box, the string action was higher than the owner preferred. They initially played the guitar without adjusting it and were still positively surprised by the neck feel. The profile reminded them of the flatter neck on a Les Paul Modern, while feeling closer to a C shape than a D shape. They also found the finish comfortable to hold.

Afterward, the owner lowered the string action substantially and did not need to make further adjustments. They considered the factory setup a good starting point. The bolt-on neck was a welcome practical detail for this player, who valued the option of adjusting the neck angle if needed. A bolt-on construction does not, on its own, indicate how frequently such an adjustment will be necessary.

Pickups, controls, and bridge

The guitar has two Heritage Ascent humbuckers, controlled by two volume knobs, two tone knobs, and a three-way pickup selector. There is no listed coil-split function. That limits the available pickup configurations compared with guitars that can switch a humbucker into a single-coil mode, though the supplied report does not suggest that this was a dealbreaker for the owner.

The owner judged the pickups usable, but not as good as the Epiphone ProBucker pickups they knew. Their main reservation concerned the bridge pickup, which they found rather sharp in tone and somewhat prone to feedback. They could tame the brightness with a small adjustment of the tone control. This is a specific player's impression, not a measured frequency response, but it identifies a behavior worth checking if you tend to use a bright amp setting or play at high volume.

The hardware includes a Tune-O-Matic bridge, sealed tuners, and chrome-finished parts. There is no tremolo system. The guitar also has a three-ply black-and-white pickguard. No case or gig bag is included, so buyers should account for that if they need a way to transport or store the instrument safely.

Tuning stability and playability

The owner found the tuners smooth, with a comfortable amount of resistance. After string bends and hard strumming, their guitar held its tuning surprisingly well. They also considered the nut and tuners good enough to keep as supplied, with no planned replacements. As with the setup comments, this report describes one instrument and does not establish uniform results across all examples.

In use, the combination of a familiar 24.75-inch scale and C-shaped neck profile should make the H-150 Copper feel approachable to players accustomed to similar electric guitar dimensions. The 22 super jumbo frets and 12-inch radius are useful details to consider when comparing necks, but the report does not provide measurements of fret height or a detailed account of string bending and chord comfort.

Verdict

The Heritage Guitar Ascent H-150 Copper makes a favorable impression in the field report for its finish, neck feel, fretwork, and stable tuning. The owner was satisfied with the guitar at a reported purchase price of 350 euros, although the listed product price is 332 and does not specify a currency. The different figures should not be treated as directly comparable.

The main reservations are the bridge pickup's sharp character and tendency to feed back, along with the lack of coil splitting. The tone control offers a simple way to soften the bridge pickup, and the owner found no need to replace the tuners or nut. For a player seeking a copper-finish, dual-humbucker guitar with a bolt-on maple neck, this model has a promising set of reported strengths. Try the bridge pickup at your intended volume before buying, and remember that a case or gig bag is not included.