Gibson SC Custom EB Batwing HA CS

Gibson SC Custom EB Batwing HA CS review

The Gibson SC Custom EB Batwing HA CS is a U.S.-made Custom Shop SG Custom with a double-cutaway body, a black finish, and a distinctive batwing pickguard. Its listed price is 6,990, and the model has been available since May 2026. The specification sheet identifies it as a single instrument, item number 643797, and includes a case. No customer reviews are available, so this assessment is based only on the supplied product details.

The construction centers on mahogany for both the body and set neck, with an ebony fingerboard and no separate top. The fingerboard has 22 frets, block inlays, and a stated radius of 305 mm, or 12 inches. Gibson specifies a '60s Slim Taper neck profile and a Corian nut. Those details define the instrument's materials and geometry, but the available information does not establish how the neck feels in hand or how the guitar responds acoustically.

Construction and dimensions

The model's double-cutaway shape follows the SG Custom designation. Its mahogany body has no listed top layer, while the mahogany neck is set into the body rather than bolted on. The fingerboard binding is single-layered, and the headstock binding is multi-layered. These trim details sit alongside the multi-layered black-and-white batwing pickguard, which is a prominent part of the named design.

There is a small discrepancy in the scale figures. The general specification list gives 628 mm, while the detailed description states 629 mm and also supplies the equivalent of 24.75 inches. The difference is only one millimeter, but buyers comparing measurements should confirm which figure applies to the specific instrument. The listing otherwise gives a clear fret count of 22.

Pickups and controls

The pickup layout is described as HH, with two humbuckers: a 498T at the bridge and a 490R at the neck. Control hardware consists of two volume knobs, two tone knobs, and a three-way toggle switch. This provides separate volume and tone controls for the two pickup positions, according to the stated layout. The specification sheet does not provide output readings, wiring options, coil-splitting functions, or detailed tonal descriptions, so none can be confirmed from the supplied data.

There is no tremolo system. The bridge is a Tune-O-Matic, and the tuning machines are Grover kidney-style units. The hardware has a gold finish. Together, these are specific component choices, but the listing does not identify the tailpiece model, gear ratio, or any setup measurements. It also does not state whether the guitar ships with particular strings or a factory setup specification.

Finish, case, and practical details

The finish is listed as Murphy Lab Heavy Aged, with the color described as Ebony high-gloss. The product is also identified as black in the basic data. These descriptions appear in the same specification set, so shoppers should check product photographs or confirm the exact finish with the seller if the visual distinction matters. The aging designation is part of the stated finish; the listing does not detail the treatment process or describe the instrument's condition beyond that name.

A case is included, while a gig bag is not. The product is marked as a Custom Shop model and made in the USA. No limited-run designation is provided. The stated price is 6,990, but the source data does not specify a currency, taxes, or regional pricing, so those details should be checked with the retailer.

What the specifications establish

On paper, this is a mahogany-and-ebony SG Custom with a set neck, 22 frets, a pair of Gibson humbuckers, a Tune-O-Matic bridge, and gold hardware. The batwing pickguard, layered binding, block inlays, and aged ebony finish set out the model's visual specification. The included case is a useful package detail, while the absence of a gig bag is explicitly stated.

The information supports a technical comparison of materials, controls, and listed hardware, but it cannot establish weight, balance, fret finish, pickup output in use, setup quality, or individual instrument condition. There are no customer comments to supplement the specifications. The scale-length mismatch also merits clarification before purchase. For buyers evaluating this model, the most useful next steps are to verify the scale figure, inspect the finish on the actual instrument, and confirm the quoted price and case details with the seller.