Fender Player II Tele RW CHM
The Fender Player II Tele RW CHM pairs a high-output Seymour Duncan bridge pickup with a traditional neck single-coil in a versatile, straightforward Telecaster layout. Its specifications are appealing, though the price and lack of an included bag or case deserve consideration.
★★★★★ 4.5/5 · 2 buyer reviews · 5 min read · updated 2026-10-07 · Tested by Cal Whitaker
Fender Player II Tele RW CHM: the specifications
The Fender Player II Tele RW CHM is a solid-body electric guitar with an alder body, a bolt-on roasted maple neck, and a rosewood fingerboard. Its Chameleon finish gives the model its most distinctive listed visual detail. The specification sheet does not name a top wood, and it lists no tremolo system. That fits the straightforward fixed-bridge layout described for this Telecaster.
The listed price is 939. The supplied details do not specify a currency, so that figure should be checked against the seller's listing before purchase. The item number is 653329. A case and gig bag are not included, according to the product information.
Neck, fingerboard, and playing dimensions
The neck uses a Modern C profile and is made from roasted maple. Fender specifies a 648 mm (25.5-inch) scale length, a 42 mm (1.65-inch) nut width, and a 241 mm (9.5-inch) fingerboard radius. Those dimensions provide useful points of comparison for players choosing a neck by feel, though the spec sheet alone cannot establish how the instrument will feel in a player's hands.
The rosewood fingerboard has white dot inlays and 22 medium jumbo frets. That is a clear, conventional layout, with the fret count and fret size identified in the supplied specifications. No fret material or neck finish is listed, so neither can be assessed here. The nut is described as synthetic bone.
Pickup layout and controls
The guitar has two single-coil pickups, but they are not described as a matched pair. At the bridge is a Seymour Duncan Quarter Pound Tele pickup. The neck position uses a Player Series Alnico 5 single-coil pickup. This combination gives the specification sheet a specific pickup identity rather than simply listing generic bridge and neck units.
Controls consist of one master volume, one master tone, and a three-way switch. The provided information does not detail the exact switching positions or electrical values of the controls. It is therefore possible to identify the basic control arrangement, but not to make claims about measured output, frequency response, noise, or the differences between settings. No customer reviews were available for this product, so there are no user reports to add to the technical description.
Bridge, hardware, and strings
A six-saddle Tele bridge anchors the strings through the body. The saddles are steel, and the bridge specification gives a practical level of detail for buyers comparing hardware layouts. The guitar also has Fender ClassicGear tuning machines and nickel/chrome hardware. No tremolo is fitted, which keeps the listed bridge arrangement fixed rather than vibrato-equipped.
The supplied strings are Fender USA 250L nickel-plated steel, in a.009,.042 gauge set. That is the factory string specification provided for this model. String choice can be changed after purchase, but the source information does not establish how the guitar is set up at the factory, including its action, relief, or intonation.
What the specification supports
On paper, the Fender Player II Tele RW CHM brings together a familiar Tele-style fixed bridge, two distinct single-coil pickups, a roasted maple neck, and a rosewood fingerboard. The dimensions are stated clearly enough to compare with other guitars, while the named pickup models and tuning machines make the hardware list more specific. Its Chameleon finish is the stated color, and the black, white, and black three-ply pickguard provides another identified exterior detail.
There are limits to what can be concluded from these details. They do not verify build quality, tuning stability, acoustic resonance, pickup balance, or setup consistency. Those points require hands-on inspection or reliable testing, neither of which is supplied here. The available information also does not include a case or bag, and does not identify a top material.
Bottom line
The Fender Player II Tele RW CHM is specified as an alder-bodied, fixed-bridge electric guitar with a 25.5-inch scale, a Modern C roasted maple neck, and a rosewood fingerboard. Its bridge pickup is a Seymour Duncan Quarter Pound Tele, paired with a Player Series Alnico 5 neck pickup. For a buyer, the strongest basis for evaluation is this defined hardware and neck specification, weighed against the listed price of 939 and the absence of included case or gig bag. Since no customer feedback is available, this is a technical assessment of the published details, not a report of playing impressions.
Shipping and duties
The retailer ships from its warehouse in Germany. Prices are shown in US dollars and do not include import duties. Orders under roughly $800 usually clear US customs without duty; above that, a duty of a few percent may be collected on delivery. 30-day money-back and a 3-year warranty apply.
Scores by area
Where it shines, where it stumbles
What convinced me
- Seymour Duncan Quarter Pound bridge pickup offers a distinctive, high-output Telecaster voice.
- Roasted maple neck, rosewood fingerboard, and Modern C profile provide a familiar, practical playing setup.
- Six-saddle bridge with string-through-body construction allows individual saddle adjustment.
What bugged me
- No case or gig bag is included.
- The pickup combination and three-way switch offer fewer tonal options than more complex switching systems.
Is it the right one for you?
Good pick if
A good fit for Telecaster players seeking a high-output bridge pickup, a traditional neck single-coil, and familiar controls. Also suits players who value a roasted maple neck and adjustable six-saddle bridge.Look elsewhere if
Not ideal for buyers who need an included case or gig bag. Consider other options if you want more than three pickup settings or a more elaborate control layout.Suggested level: Intermediate
Specifications
- Color
- Chameleon
- Pickups
- SS
- Fretboard
- Rosewood
- Tremolo
- None
- Body
- Alder
- Top
- None
- Neck
- Erable torréfié
- Frets
- 22
- Scale
- 648 mm
- Including case
- No
- Incl. bag
- No
Up close
Watch and listen
Before you decide
Questions players ask
What pickups are installed?
It has a Seymour Duncan Quarter Pound Tele single-coil pickup at the bridge and a Player Series Alnico 5 single-coil pickup at the neck.
Does it include a case or gig bag?
No. Neither a case nor a gig bag is included.
What is the neck and fingerboard setup?
The bolt-on roasted maple neck has a Modern C profile and a rosewood fingerboard with a 241 mm (9.5-inch) radius.
How is the bridge configured?
It uses a six-saddle Telecaster bridge with strings through the body and steel block saddles.
How many pickup settings are available?
The three-way switch selects the bridge pickup, neck pickup, or both pickups together. Master volume and tone controls shape the output.
The last word from the bench
This model combines an alder body, roasted maple neck, rosewood fingerboard, and 22 medium jumbo frets with a familiar Telecaster control layout. The Seymour Duncan Quarter Pound bridge pickup gives it a more forceful bridge option, while the Player Series Alnico 5 neck pickup adds a contrasting voice. The six-saddle bridge and ClassicGear tuners provide useful adjustment and tuning hardware. It is a strong option for players seeking this specific pickup pairing, but buyers should budget separately for a case or gig bag.
Hanging next to it
Fender Player II Tele RW CHM
Today's price and delivery time are shown at the retailer.
Guitar Gear Reviews