Fender Roasted Pro Strat HR 3TSB

Fender Roasted Pro Strat HR 3TSB: Technical Review

The Fender Roasted Pro Strat HR 3TSB is a U.S.-made Stratocaster model in a limited 2026 run. Its listed specifications combine a two-piece alder body, a roasted maple neck, a rosewood fingerboard, and three hand-wound Poblano Custom Shop single-coil pickups. The finish is described as Heavy Relic, and the color is 3-Color Sunburst. No customer reviews are available, so this assessment is based on the supplied specifications rather than owner reports or a hands-on evaluation.

The stated price is 5999, with no currency specified in the product information. The item number is 653310, and availability is listed as beginning in September 2026. The package includes a case, but not a bag. These details establish the model's listing and included accessories without implying anything about current stock or regional pricing.

Body, Finish, and Neck

The body is made from two pieces of lightweight toasted alder, with no separate top. Alder is the body wood named in the specifications; the product listing does not provide a measured instrument weight. Its 3-Color Sunburst finish is paired with a Heavy Relic treatment. That describes the specified appearance, but the listing does not explain how the aging is applied or provide details about finish materials.

The neck is dark-tinted roasted maple with a 1960s C-shaped profile. A 648 mm scale length gives the model its stated long-scale format. The fingerboard is dark 3A rosewood, with a compound radius that changes from 241 mm (9.5 inches) to 305 mm (12 inches). That geometry is a concrete design feature; the supplied information does not establish how it will feel to a particular player or how the instrument is set up from the factory.

The fingerboard has 21 Narrow Tall frets, identified as size 6105, and a bone nut. The specifications do not state the nut width, fretboard edge treatment, or setup measurements. Those omissions matter when comparing necks closely, since the listed profile and radius alone do not describe every aspect of hand fit or playability.

Pickups and Controls

Pickup configuration is SSS: three single-coil pickups, with a reverse-wound, reverse-polarity pickup in the middle position. The set is identified as hand-wound Poblano Custom Shop Strat pickups. The listing also names Fat '50s Strat 1/2 blender wiring, along with a three-way switch. It does not give a control-by-control wiring diagram, so the precise operation of the blender circuit should be confirmed with Fender or the seller before purchase.

The pickup descriptions identify the design and configuration, but provide no output measurements, frequency response, or recorded examples. As a result, claims about volume, tonal balance, noise, or how the guitar responds through a specific amplifier would go beyond the available evidence. Buyers comparing pickup systems should treat the maker's component description as the available information, not as a substitute for listening to the instrument.

Bridge and Hardware

The guitar has a vintage-style bridge and Sperzel Trim-Lok tuning machines. A modern string tree is also specified. The source describes the bridge as vintage-style but does not provide further construction details, such as the number of saddles, bridge spacing, or tremolo arm specifications. It is therefore possible to identify the general bridge type, but not to verify its exact hardware layout from this listing.

The product data elsewhere calls the tremolo "Vintage," which is consistent with the vintage-style bridge description, but does not add further operating or setup information. No details are supplied for string gauge, tuning stability testing, or adjustment range. Those are practical points to check in person, particularly for players who rely on a specific tremolo setup.

Who Should Consider It

The listed specification set will be most relevant to players seeking a Stratocaster with a roasted maple neck, rosewood fingerboard, three single-coil pickups, a vintage-style bridge, and a relic finish. Its 21-fret layout and 648 mm scale are clearly stated, while the compound fingerboard radius distinguishes the neck description from a single-radius design. The limited 2026 designation and included case are also part of the package information.

There are meaningful gaps for a purchase decision at this stated price. The listing provides no customer feedback, instrument weight, detailed control diagram, setup data, or hands-on performance evidence. It also leaves the currency unspecified. Prospective buyers should confirm those points, along with the exact bridge configuration and the blender control's operation, with the seller before ordering.

On the information available, the Fender Roasted Pro Strat HR 3TSB is a specifically equipped U.S.-made Stratocaster with clearly identified woods, neck geometry, pickup configuration, and hardware. The specifications support a useful comparison on paper, but they do not establish how an individual example sounds, feels, or performs.